152 jobs found

£30 to £75K PA + benefits      Refinery/Downstream Consulting Our client is an expert services and software modelling company dedicated to the refining and petrochemical industries. A pioneer in the development and use of proprietary simulation models and cloud technologies and an expert in operational and production enhancement for low or no CAPEX, our client develops solutions that positively impact the productivity, profitability, flexibility, maintainability and environmental performance of their international energy company customers through technological changes and operational efficiencies  based on a fundamental assessment and analysis of existing and required processes and unit operations . The successful candidate will undertake performance and yield benchmarking, Identify and characterise constraints and inefficiencies in existing and proposed processes, undertake simulations and run plant models, review options and solutions in conjunction with R+D, senior...

£55 to £85,000pa + car allowance  Refinery / Petrochem Consulting   Our client is a leading consultant to the downstream sector, undertaking a range of strategic development, optimisation, techno-economic and commercial services for refinery and petrochemical majors around the world. One of our clients’ principal services is in providing support in the subject areas of reliability, availability, and maintenance. Focusing on bench marking studies, best practise and procedure, shutdowns/turnaround planning and execution, HSE, failure analysis/RCM etc., the organisation focuses on flawless operations, maximising plant and asset integrity and cost management.  A chartered mechanical or chemical engineer, the job holder will have extensive maintenance and production experience acquired within a refining, petrochemical or oil and gas operating company or consultant and be comfortable with travel   Key Responsibilities: Lead a major maintenance team transformation project...

Overview:  Oak Ridge National Laboratory is the largest US Department of Energy science and energy laboratory, conducting basic and applied research to deliver transformative solutions to compelling problems in energy and security.   We are seeking a Mechanical/Piping Designer who will produce high quality engineering design packages under the general technical supervision of the Target Systems Group leader and with technical direction from design engineers within the Research Accelerator Division (RAD) at the Spallation Neutron Source (SNS). This position resides in the Target Systems Group, Target and Mechanical Systems Section, in the Research Accelerator Division (RAD) of the Neutron Sciences Directorate (NScD) at Oak Ridge National Laboratory (ORNL).     Collects and maintains records, technical drawings, and documents in accordance with SNS document control procedures. Creates computer-aided design (CAD) models and detailed design...

AWE is recruiting for Manufacturing Engineers! As we move into an exciting phase in our programme, we have a number of opportunities for Manufacturing Engineers to join AWE and support our vital role in keeping the Nation safe. Manufacturing Engineer Location: South East Salary: £33,850 - £50,800 (dependent on skills and experience) + allowance AWE (one of the best 25 big companies to work for in the UK) offers an attractive array of benefits which include: Market leading contributory pension scheme Generous holiday entitlement 270 hours a year (inclusive of Bank Holidays) plus every other Friday off Flexible working hours Salary sacrifice scheme Consideration for either full time or part time hours. Just let us know on your application if you wish to work part time Relocation package available (terms and conditions apply) Working in a highly regulated environment the role of the Manufacturing Engineer is to support our...

£ highly competitive, plus company bonus and quality benefits Drying /dewatering capital goods Our client is a world leader in dewatering and drying systems using mechanical, thermal and reaction technologies. The company operates out of several European hubs and is very active in the starch, chemical and food ingredients sector where further growth is planned. The business is looking to appoint a senior Sales Manager for European activities reporting to the European Sales Director. The successful candidate will have a proven record in selling equipment such as evaporators, dryers, centrifuges, pneumatic conveyors and related technology to specifiers, contractors and operating companies. Our client’s service standards and product portfolio are highly regarded and supported by a significant ongoing commitment to research and development aimed at maintaining their position as market leaders. The successful candidate will assume responsibility for all sales and after sales...

London/Flexible Insurance sector Our client is a world leader in international Insurance provision to the high risk /high hazard sectors including energy, chemicals, and marine, mass transport and power. The business, represented in over 50 countries globally, has a thriving and long-established office in London from where it supports EMEA. The team is growing in response to client demand and a further power specialist with significant experience of renewable and, ideally, conventional power generation operations and engineering is now sought.   Involvement is offered in a wide range of insurance risk engineering activities within the Power and Renewables sectors, including Insurance Underwriting Surveys, Risk Assessments, broking and client technical support, and business development   Main Responsibilities: Carrying out risk assessments, operational insurance related site surveys and reviews of new projects for Power & Renewables...

Hygienic Ingredients    £55 to£80,000 PA + good bens Our client is a high quality contract processing company specialising in powder and granule processing service for a wide range of customers with products going into medical devices, medicated animal feed, food ingredients and speciality engineering applications.   The site operates ISO9001, ISO14001, FSSC 22000 and pharmaceutical quality management systems. Our client’s customers highly value the business’s ability to react quickly and safely to resolve problems and deliver a quality service. Changes to planning occur regularly and are driven by a range of technical and commercial factors.    The technical development of new and existing processes requires a hand on approach from the management team and will always involve direct interaction with all employees....

Site Production Manager Speciality / Fine Chemicals £65 to £80K PA + quality bens Occupying an exciting and challenging role and reporting to the Managing Director, the Site Production Manager is responsible for planning and coordinating all production activities on a specialty chemical top tier COMAH facility. This covers a range of processing from batch manufacturing, dispersion to complex semi continuous reactive chemistry to ensure all the plant and process operates to world class standards of efficiency and effectiveness whilst maintaining safety, environmental and quality standards. The appointee will be responsible for delivery and achievement of cross functional KPIs and Key Performance Indicators. Our client is looking for a confident responsible people leader who can demonstrate a lean, analytical, and strategic mindset with broad knowledge of end to end operations for production and operational maintenance teams. The role is in a fast-paced 24/7 environment...

 £65 to £80K per + benefits + Car Allowance Downstream Consulting                                                                             Our client is an expert services and software company dedicated to the refining and petrochemical industries. A pioneer in the development and use of proprietary simulation models and cloud technologies and an expert in operational and production enhancement for low or no CAPEX, our client develops solutions that positively impact the productivity, profitability, flexibility, maintainability and environmental performance of their international energy company customers through technological changes and operational efficiencies  based on a fundamental assessment and analysis of existing and required processes and unit operations . Duties and responsibilities of the role include mainly energy performance improvement studies, but also yield benchmarking studies, Identifying and characterising constraints and inefficiencies in existing...

 £40 to £60K pa + benefits  Downstream Consulting                                                                             Our client is an expert services company dedicated to the refining and petrochemical industries. A pioneer in the development and use of simulation models and an expert in operational and production enhancement for low or no CAPEX, our client positively impacts the productivity, profitability, flexibility, maintainability, and environmental performance of their international energy customers. Responsibilities include energy performance improvement studies, yield benchmarking, characterising constraints, and inefficiencies in existing and proposed processes, running plant models, reviewing solution options in conjunction with R+D, internal consultants, technology providers and constructors and submitting reports and propositions for client review. Candidate experience should cover energy studies and site surveys, pinch analysis, utility system...

West of London /M4 Process Systems Our client develops, engineers, fabricates, supplies, and installs discreet process equipment items and complete process systems for applications within chemical /process engineering. The company’s reputation is well established and founded on its commitment to product innovation, customer service and engineering excellence. The focus of the role would include work on dryers and evaporation systems involving complex and challenging thermal and mass-transfer issues. On the job training would be provided for the following activities supervised by a senior engineer. Application for Chartership would be supported.   Analysis of process data from clients and test data from our pilot plant On site plant audits Preparation of heat and mass balances using our bespoke software Equipment sizing Project costing Preparation of Sales proposals Preliminary PFD & P&ID preparation   Also, there would be some participation on...

Fantastic opportunities for Safety Assessment Specialists to join our Warhead Engineering Team. AWE is looking for Safety Assessment Specialists. It takes a special sort of person to work at AWE. What if that person was you? Salary: 42,650 - 65,000 (dependent on experience) AWE (one of the best 25 big companies to work for in the UK) offers an attractive array of benefits which include: Market leading contributory pension scheme Generous holiday entitlement 270 hours a year (inclusive of Bank Holidays) plus every other Friday off Flexible working hours Salary sacrifice scheme Consideration for either full time or part time hours. Just let us know on your application if you wish to work part time Relocation package available (terms and conditions apply) This is a great opportunity to join a team responsible for ensuring that the UK Nuclear deterrent is assured as safe for its full lifecycle. The role will be influencing the next generation of...

ABOUT SABIC SABIC is a global leader in chemicals headquartered in Riyadh, Saudi Arabia. From making cars and planes more fuel-efficient, to helping conserve the world’s water supply and enabling colorful smartphone cases, we find solutions to the challenges of today to help our customers achieve their ambitions and build a better tomorrow.     At SABIC, we combine a rich track record of doing what others said couldn’t be done, with a deep understanding of our customers. But our true impact is as a partner who can help our customers achieve their ambitions by finding solutions to their challenges. We call this ‘Chemistry that Matters™’   JOB SUMMARY The Process Engineer supports unit performance assurance and optimization, long term improvements and development of studies.   Job Purpose & Responsibilities Can provide complex troubleshooting of existing issues within operations. Scope and...

AWE is recruiting for Manufacturing Engineers! As we move into an exciting phase in our programme, we have a number of opportunities for Manufacturing Engineers to join AWE and support our vital role in keeping the Nation safe.   Salary: 33,850 - 50,800 (dependent on skills and experience) + allowance AWE (one of the best 25 big companies to work for in the UK) offers an attractive array of benefits which include: Market leading contributory pension scheme Generous holiday entitlement - 270 hours a year (inclusive of Bank Holidays) plus every other Friday off Flexible working hours Salary sacrifice scheme Consideration for either full time or part time hours. Just let us know on your application if you wish to work part time Relocation package available (terms and conditions apply) Working in a highly regulated environment the role of the Manufacturing Engineer is to support our production operations; continuous Improvement...

AWE is recruiting Tooling Design Engineers. As we move into an exciting phase in our programme, we have a number of opportunities for Design Engineers to join AWE and support our vital role in keeping the Nation safe.   Salary: 33,850 - 50,800 (dependent on skills and experience) + allowance AWE (one of the best 25 big companies to work for in the UK) offers an attractive array of benefits which include: Market leading contributory pension scheme Generous holiday entitlement 270 hours a year (inclusive of Bank Holidays) plus every other Friday off Flexible working hours Salary sacrifice scheme Consideration for either full time or part time hours. Just let us know on your application if you wish to work part time Relocation package available (terms and conditions apply) Working in a highly regulated environment the role of the Tooling Design Engineer is to develop bespoke hardware designs to support programme requirements. Whilst...

Company Description Join us as our Principal Process Safety Engineer to help us support the development  and implementation of the  global Process Safety Management (PSM) program for our mining processes. People. Process. Performance. You’ll keep sight of it all.  The purpose of Technical & Sustainability (T&S) in Anglo American is to drive the future of mining.   Globally located, our T&S departments work together with operations across business units and geographies. Our Safety & Sustainable Development teams aim to help Anglo American be the global leader in safe and sustainable mining. We want to ensure that no-one ever gets hurt or loses their life while working with us, so we are unconditional about safety. We expect everyone in Anglo American to be a safety leader. That means intrinsic safety in living our values of care and respect, collaboration, accountability, integrity and...

Grade: Grade 5 About our agency If you’re part of the Environment Agency (EA), you’re part of the solution. Working with us means protecting and improving the environment for generations to come, tackling issues of national importance across a huge variety of disciplines.   The Environment Agency regulates a range of activities that affect the environment, people and the economy. As an Installations Officer you will have the opportunity to create a better place for people and wildlife through regulation and influence.   Your role with us You’ll join the Greater Manchester, Merseyside and Cheshire Installations team. You’ll be responsible for regulating a portfolio of sites, ensuring compliance under the Environmental Permitting Regulations. You work will cover a variety of industry sectors, ranging from Food and Drink to Chemicals, Refineries and more.   Your duties will include ensuring permit compliance and...

Grade: Grade 5 About our agency If you’re part of the Environment Agency (EA), you’re part of the solution. Working with us means protecting and improving the environment for generations to come, tackling issues of national importance across a huge variety of disciplines.   The Environment Agency regulates a range of activities that affect the environment, people and the economy. As a COMAH Installations Officer you will have the opportunity to create a better place for people and wildlife through regulation and influence.   Your Role with us We are looking for two enthusiastic professionals to join our North West Hub Control of Major Accident Hazards (COMAH) Regulatory team as Installations Officers. One position will work from our Preston or Penrith office and one position will work from our Warrington office, however there is flexibility to work from home in both positions.   Your work will involve regulation of high...

The Role The company is seeking a Chemical Engineer to join the team, with the role of: Leading technical work on process design of Xampla’s biodegradable microcapsules Translating chemical lab scale proof of principle to small scale lab process Develop and optimise processes to small pilot scale Manage pilot plant trials and support design of process for production of commercial samples Developing/establishing in-process controls/analytical tools to ensure product quality Maintenance of Lab and Pilot Plant related equipment Liaise with customer R&D and production teams Opportunity to build a team of Lab Technicians/ Research Assistants as the company grows Candidate Experience The company is seeking candidates with: A MSc degree or PhD (or equivalent) in a discipline relating to Chemical Engineering, Mechanical Engineering or Materials Science Experience on microencapsulation, emulsions and/or microfluidics Experience of...

AWE is currently recruiting for Chemical Process Engineers within our manufacturing engineering division. Location: Reading/Basingstoke area Salary: 33,850 - 50,800 (dependent on skills and experience) + Allowance AWE (one of the best 25 big companies to work for in the UK) offers an attractive array of benefits which include: Market leading contributory pension scheme Generous holiday entitlement 270 hours a year (inclusive of Bank Holidays) plus every other Friday off Flexible working hours Salary sacrifice scheme Consideration for either full time or part time hours. Just let us know on your application if you wish to work part time Relocation package available (terms and conditions apply) We design and manufacture a wide range of products, materials and tools to support our mission. Our operations include precision component manufacture, fabrication, explosive formulation, fissile material production, rubbers and plastic and warhead...